After a long tenuous day finally when you make time for snuggling under the covers – the smoke detector starts beeping. What’s worse is that it does not seem to stop as well. If this is what you are facing then you have come to the right place.
In this article, I will be discussing “how do you stop a hardwired smoke detector from beeping” and more. Keep reading till the end to find out even more information!
Things To Do For Stopping A Hardwired Smoke Detector From Beeping
The standard smoke detectors run mainly on batteries whereas the hardwired ones are wired directly into a home’s electrical system. The Hardwired smoke systems are more suited for apartment buildings, multi-level homes, and other kinds of commercial structures.
Here is a list of things that you can try to stop the chirping/beeping of your smoke detector:
Check For A Home Emergency First
The beeping can be indeed very annoying and it is completely understandable for you to turn it off. However, you also need to carefully analyze the possibility of an actual fire breaking out in some part of your house.
The chirping of a detector due to a dead battery or malfunction occurs at random or after every 30-second interval. If the detector is beeping continuously then it might be because there’s an emergency or actual fire.
Consider Replacing The Batteries
The detectors that are hard-wired connect to the electrical wiring of a building. A few of these detectors also have a replaceable backup of a 9-volt battery that’s installed inside. The detector might also chirp/beep when its battery needs replacing.
There are also a few types of hard-wired detectors out there that have a built-in backup of batteries that cannot be replaced. These batteries run for about ten years – which is equal to the lifespan of the smoke detector itself.
Evaluate The Fit Of The Battery
Even after having replaced the battery if the smoke detector still keeps chirping then that might indicate a backward or loose battery.
A majority of smoke detectors make it impossible to insert the battery incorrectly, but even then it could happen. If that’s the case then you could try inserting the battery again!
Keep reading till the end of the article to find out more information about “how do you stop a hardwired smoke detector from beeping”!
Monitor The Temperature Fluctuations
There are a few components of the smoke detector that have a great amount of sensitivity to outside temperature fluctuations. Such kind of environmental changes could lead to the smoke detector beeping. Hence, you need to actively watch out for temperature fluctuations and if they are what’s causing the beeping to take place.
Make sure to avoid placing the detector in a bathroom, shower, or in such an area where air from the home’s cooling and heating system does not reach.
Take A Look At The Breaker
If the breaker in your electrical panel happens to trip and you also have a hard-wired detector then that is why you might be hearing the beeping.
How do you stop a hardwired smoke detector from beeping then? Well, in this case, it is not work you can do so make sure to call a technician/pro who can fix the breaker situation of your hardwired smoke detector.
Check For Expiry
A typical smoke detector generally lasts for about 10 years including that of hardwired ones. There are also a few hard-wired detectors that start beeping around their 10-year mark.
The battery of these kinds of detectors also cannot be replaced. Hence, the only thing to do after a device’s expiry is to exchange it with a new one.
Reset The Detector
Some smoke detectors after having their battery replaced need to be reset. With the majority of the detector models, you only need to press and hold the “test button” for at least 15 seconds to completely reset the unit and hopefully stop the detector from continuously beeping.
There are also a few units that have a mute button situated right next to the test button. This is so that the detector is not able to sound its super shrill alarm for the entirety of 15 seconds.
Check The Other Smoke Detectors
The sound of smoke detectors is so loud that it sometimes gets difficult to determine which smoke detector is beeping. For instance, you could be checking the smoke detector near the kitchen for the beeping sound rather than the one upstairs in a room.
Consider Calling A Pro
Even after trying out all of the above-listed methods, if the problem of beeping/chirping persists then you ultimately have to call in a professional to get it fixed. They will be able to give you the correct suggestions to fix your smoke detector beeping situation correctly.
To Wrap It Up!
After trying out the above-mentioned ways, your problem of smoke detector beeping is surely going to be fixed. If the problem persists then of course only a professional technician would be able to help you out with your decision.
Thank you for reading till the end of the article. I hope you found the information pertaining to “How do you stop a hardwired smoke detector from beeping” to be useful.
Read More:
- The Vital Role Of Safety Director Jobs
- Who Owns Jeep? Everything You Have To know About Jeep
- Why Does My Smoke Detector Keep Beeping Even After I Change The Battery?
About The Author
